— Ultimate Detail —
This is the optimum detail that I offer for your vehicle. Through a painstaking process every component on your vehicle seen or unseen is cleaned, sealed and protected. To make sure your vehicle not only looks good but will last the course of time, preventing premature wear and degradation of every aspect of your vehicle.
The Process step by step
18 stages wash process....
- Alloy wheels cleaned using a safe non acid wheel cleaner and various brushes to reach all areas, rinsed
- Arches cleaned using degreaser and APC (all purpose cleaner) and various brushes
- The Vehicle is then blanketed in PH Neutral cleansing foam/snow foam for its pre wash (which softens and lifts grit dirt and grime)
- Thoroughly rinsed
- Door shuts, boot, fuel filler cap are cleaned using APC and various brushes
- Thoroughly rinsed
- Then washed using the 2 bucket method with grit guards and various wash mitts
- Thoroughly rinsed
- Tar spots removed using Autosmart Tardis
- Thoroughly rinsed
- Metallic fallout removed using Iron X
- Thoroughly rinsed
- Vehicles paintwork and glass clay barred to remove bonded contaminants
- Snow foamed again
- Thoroughly rinsed
- Fully dried using 'deep pile' microfiber drying towels
I will fully remove the wheels in order to treat and protect every aspect of the wheel, arch linings, suspension, brake components and so on.
Full Correction Detail....
- An extensive 3 stage machine polishing process will be undertaken....
- The vehicles paintwork will be measured using a specific paint thickness gauge and inspected under various lighting for defects
- All trim, seats etc taped up to protect them while machining
- Paintwork corrected via rotary machine polisher using suitable pads and compounds
- Paintwork further enhanced using fine polishes and then burnished for the ultimate finish
- Once the Correction is complete the car is followed by an Isopropyl pure alcohol (IPA) wipe down to remove any remaining oils that might mask the finish
- 3 coats of a top grade pre selected wax or sealant of your choice
- Exterior and interior glass cleaned with a specific glass cleaner
- Trim cleaned and dressed, exhaust polished
Engine Bay Detail....
- The entire engine bay and surrounding areas will be sprayed with a degreasing agent and agitated with various brushes to remove grease
- Then cleaned using an APC and various brushes
- Carefully rinsed at low pressure (electrical components covered up where necessary)
- Thoroughly dried
- All plastics, paint and chrome dressed and protected to prevent future build up of dirt and grime.
Interior Detail....
- Vehicle is fully hovered
- Upholstery undergoes a shampoo process using a wet extraction machine
- Dashboard and interior trim cleaned using an APC
- All interior trim treated and protected using premium products carefully selected for a natural showroom finish
- All interior glass cleaned and polished
- Leather thoroughly cleaned then fed/conditioned using suitable leather cleaner and conditioner and a suitable brush
- Boot thoroughly cleaned (including spare wheel etc) treated and protected
- Door shuts then cleaned and sealed for protection, preventing grime build up
- Finally sprayed with an autofresh fragrance which counteract unpleasant odours leaving a long lasting, refreshing fragrance
From £600.
Time taken for this detail is 4-7 days
Price may vary depending on vehicle size and condition. Reflecting time spend.
— Contact Chris about the Ultimate Detail below —